5 Cylinder Radial
Fantastic work Brian Thumbsup  and your video was great   Smiley-signs107
Smiley-eatdrink004 
DaveH
 a child of the 60's and 50's and a bit of the 40's Smile
Reply
Thanks given by:
A little more.

           
Brian. Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
As the sun starts to shine, workshop time goes down. But I still manage to get a little done.
The side access cover location has been milled, the bearings and camshafts fitted.
The next job will be all the fiddly holes for the screws, then the fancy work, fins and bevels, and the cut out under the side cover so I can get to the screws that help fix the drive pulley

.       

Brian. Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
Back from holiday with loot in the baggage. material the crank case and rear casing including the steel for the gears and shafts, 

      

next winter is booked,
Brian. Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
Looking good Brian!
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
Well what happened was the weather got to hot to go outside and I was forced to retire to the shop as it is the only cool place.
and I did a little work???????

   

   

Brian.  Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
Looking very nice!
Hunting American dentists since 2015.
Reply
Thanks given by:
WOW! It must have really been hot! I'm sure it took some time to whittle out that crankcase.

Nice work Brian.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
All the way from 2.3 Kg  to 346 g   Tom

Brian.   Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
Time very well spent coming together nicely I'd say.

Greg
Magazines have issues, everything else has problems

Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)