Bending Question
#1
Hello all,

I have this piece of metal and wondering what the best way would be to bend it to a 3.5" or 3.75" rad. Went to a couple of small shops and they said they could hit it with a brake but that would just put a crease in it. Any suggestions so I sound more informed when I go to other shops? Or anyone on here interested in doing it. Its something I just want to do about a dozen for now so I can make a prototype of something then would be hopefully hundreds.

Here is the parthttp://www.sickleservice.com/205-006.html


Thanks
Reply
Thanks given by:
#2
Would help to know the thickness of the material.
Magazines have issues, everything else has problems

Reply
Thanks given by:
#3
Yes it would. Thought it was in the link.

11 gauge
Reply
Thanks given by:
#4
So, in looking for the thickness answer I found that I can get it in 12 or 14 ga also if this helps. Would prefer the heaviest I can use but probably better done with "standard" sheet metal shop equipment.

Thanks again
Reply
Thanks given by:
#5
Do you mean roll it 3.5 radius? bending in break terms means to fold, rolling means to form a circle


Anthony.
ieezitin, proud to be a member of MetalworkingFun Forum since Jan 2013.
Reply
Thanks given by:
#6
Roll...want to be able to weld it to a part with a 3.5 to 4" inside rad.
Reply
Thanks given by:
#7
Also, this is not really precision work...just want to be able to hold it inside a part to weld it.
Reply
Thanks given by:
#8
heat it up and bend it around a piece of 3 inch pipe
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#9
OR use pipe ...

Anthony
ieezitin, proud to be a member of MetalworkingFun Forum since Jan 2013.
Reply
Thanks given by:
#10
I just had a guy at my house that wanted some of those made for his old sickle bars...Bob
Bob Wright
Metal Master Fab
Salem Ohio
Birthplace of the Silver and Deming drill bit.
5 Lathes, SBL Shaper, Lewis Mill, 7 drill presses, 5 welders...
Reply
Thanks given by:




Users browsing this thread: