Reasonable Shipping To Canada
#1
Just recieved my Vertex 6 inch vise from MACHINE SHOP DISCOUNT/QUAID MACHINERY. It's a nice quality vise 6 inch very well made and finished and it sure is big, there will be no problem with rigidity with this vise it's probably more than I needed. Anyway to the subject I almost bought a lesser vise locally because of the high shipping charges + the $50.00 brokerage charge from UPS. I took a bit of a chance and ordered the vise and specified that it be shipped FEDEX ground. Ordered on July 27 I received it yesterday and was pleasantly surprised by the bill. Shipping charges were right about $30.00 for a 70 lb shipment about 2ft x1ft x1ft, there were no other charges, delivered to my door by two FEDEX personnel with no extra charges for brokerage not even GST.
I am a happy camper. TOM


FEDEX ThumbsupThumbsupThumbsup
Logan 10x26" lathe
SIEG 12x40" lathe
RongFU 45 clone mill
6" import band saw
Baldor Grinder
thousand of tools+tooling pieces 40 yrs of collecting
Reply
Thanks given by:
#2
Tom,

That's good Thumbsup
Now coming from RSA - that place with the snow storms Smiley-dancenana
what is 'brokerage' charges - is this some thing they charge you for "breaking it"? RotflRotflRotfl
Smiley-eatdrink004
DaveH
Reply
Thanks given by:
#3
(08-08-2012, 12:27 PM)DaveH Wrote: Tom,

what is 'brokerage' charges - is this some thing they charge you for "breaking it"? RotflRotflRotfl
Smiley-eatdrink004
DaveH

If if ships UPS then that's not far from the truth. Yikes

Ed
Reply
Thanks given by:
#4
Tom, I always tremble at the thought of Unsatisfactory P ostal Stagnation.
ANY other shipping method is better.Rant
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#5
Tom
Congratulations on getting that through on Fedex. They've stung me every time. The fact that you didn't get charged GST might be a source of worry. The feds never sleep, hope there isn't another bill in the mail.
I've had good luck with the US parcel post, only once got any extra charges and that was only $8 handling fee at the border.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#6
Hi Tom,
I have always tried to use the US Postal service when ever possible. They do have weight and size restrictions, but are much cheaper than anything else that I have tried. I have even had Puralator deliver thing to me that were sent using Postal Service.(might have been priority post?)

I will use any service except UPS whenever possible.

I did read an item on the web site for Little Machine Shop.com for shipping to Canada. It says that if you ship UPS Air them the brokerage is waived.
I have never tried this, but saw it on the site when i was considering placing an order.

http://littlemachineshop.com/Info/shipping.php#Canada

Anybody have any experience with Little Machine Shop to Canada?
I have heard all good experiences with them, but heard nothing about them from this side of the border

Steve
Bustednuklz, proud to be a member of MetalworkingFun since Jun 2012.
Busting my knuckles since 1986.
Reply
Thanks given by:
#7
A couple of years ago,, i ordered from Little machine shop to Canada, the order came straight through via Canada post with no problems.
Can't remember now how long it took, but it was pretty fast service.
sasquatch, proud to be a member of MetalworkingFun since Jul 2012.
Reply
Thanks given by:
#8
I have ordered several items from little machine shop and have had them all shipped via USPS usually flat rate box as it is cheaper
(no usless tracking) I once had a set of fuel injectors shipped fron Portland to Calgary UPS AIR OVERNIGHT, for 45 lb parcel it cost me over $400.00 dollars + GST and I had to go to the airport and pick it up myself or I was not to get the parcel for 3 days. No brokerage as it was waived but FEDEX could have brought me the same parcel ground in 5 days for about $50.00 go figure ripped off again.

F350 it has been just about 2 weeks and no surprizes from either FEDEX or GST. if I have to pay GST 5% on $185.00 is peanuts. tom
Logan 10x26" lathe
SIEG 12x40" lathe
RongFU 45 clone mill
6" import band saw
Baldor Grinder
thousand of tools+tooling pieces 40 yrs of collecting
Reply
Thanks given by:
#9
Tom Im hoping for ya,
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:




Users browsing this thread: