Todays Project - What did you do today?
Interesting set up,, good work!!
sasquatch, proud to be a member of MetalworkingFun since Jul 2012.
Reply
Thanks given by:
Very nice
Clever set up using the boring head ThumbsupThumbsupThumbsup
John
Reply
Thanks given by:
(04-11-2013, 10:51 AM)stevec Wrote: Brian, did you have to stop the mill and advance the "facing tool" in your boring head or does it auto feed?

Hi Steve
Yes you have to stop the mill every time you need to increase the diameter of the cut. in this case I was taking small cuts due to the cut being intermitant ,and the out of balance of the head.

Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
way back in post 1053 I posted a picture of a sheave that I made and John aka doubleboost asked how I cut the key way, well I decided to also change the one on the motor spindle so when I broached the keyway I just happened to have the camera with me.

so here's a shot of how I broached the keyway. And can anyone tell me the name of that high pressure green lube I have swabbed on the broach, I know it comes in a white plastic jar.

   
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
(04-12-2013, 05:14 PM)dallen Wrote: way back in post 1053 I posted a picture of a sheave that I made and John aka doubleboost asked how I cut the key way, well I decided to also change the one on the motor spindle so when I broached the keyway I just happened to have the camera with me.

so here's a shot of how I broached the keyway. And can anyone tell me the name of that high pressure green lube I have swabbed on the broach, I know it comes in a white plastic jar.

It's probably extreme pressure grease made by this company. I have a tube of it. It's commonly used on dead centers and available from McMaster.

http://www.cmdlubeoil.com/

I would like to see some more details on your broaching tool. I assume you made that?

Thanks,
Ed
Reply
Thanks given by:
(04-12-2013, 05:45 AM)Brian Wrote: Hi Steve
Yes you have to stop the mill every time you need to increase the diameter of the cut. in this case I was taking small cuts due to the cut being intermitant ,and the out of balance of the head.

Brian.
The reason I ask is because I no longer have access to the lovely Narex boring I had at work (it had a facing feature!) .
I had to devise my own for a cylinder head machining story I'll explain later to anyone interested.
Long and short is, I built the following device to advance the tool with every revolution.     I cut a new feed screw (7/16-20) and fitted a # 25. sprocket.


It worked great! I was able to bore the head to compensate for the "overstroke" I had given the crank.
    Then I built a bracket to clamp on the quill of my Tree mill.
   
On the bracket I added a "tooth" that would advance the sprocket one tooth. I made it so as I could lift it out of the pathof the sprocket and therefore not advance the tool.

Sorry for the jumbled pics and text. My head hurts and I'm now soothing it with another homemade brew.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
I'd be interested in that "cylinder head machining story".

Ed
Reply
Thanks given by:
Neat advance mechanism Steve. You crafty old bugger.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
(04-12-2013, 06:28 PM)EdK Wrote:
(04-12-2013, 05:14 PM)dallen Wrote: way back in post 1053 I posted a picture of a sheave that I made and John aka doubleboost asked how I cut the key way, well I decided to also change the one on the motor spindle so when I broached the keyway I just happened to have the camera with me.

so here's a shot of how I broached the keyway. And can anyone tell me the name of that high pressure green lube I have swabbed on the broach, I know it comes in a white plastic jar.

It's probably extreme pressure grease made by this company. I have a tube of it. It's commonly used on dead centers and available from McMaster.

http://www.cmdlubeoil.com/

I would like to see some more details on your broaching tool. I assume you made that?

Thanks,
Ed

me make a broachRotflRotflRotfl, no I bought it, its a standard 3MM broach and bushing from Dumont.

DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
(04-12-2013, 08:15 PM)dallen Wrote:
(04-12-2013, 06:28 PM)EdK Wrote:
(04-12-2013, 05:14 PM)dallen Wrote: way back in post 1053 I posted a picture of a sheave that I made and John aka doubleboost asked how I cut the key way, well I decided to also change the one on the motor spindle so when I broached the keyway I just happened to have the camera with me.

so here's a shot of how I broached the keyway. And can anyone tell me the name of that high pressure green lube I have swabbed on the broach, I know it comes in a white plastic jar.

It's probably extreme pressure grease made by this company. I have a tube of it. It's commonly used on dead centers and available from McMaster.

http://www.cmdlubeoil.com/

I would like to see some more details on your broaching tool. I assume you made that?

Thanks,
Ed

me make a broachRotflRotflRotfl, no I bought it, its a standard 3MM broach and bushing from Dumont.

DA

Not the broach. The broaching tool. The blue thing.

Ed
Reply
Thanks given by:




Users browsing this thread: 29 Guest(s)