MetalworkingFun Forum

Thanks, will look into that when I get a moment. Just started another set of kitchen cabinets so little metal play time.

very cool - all you need now is cctv and you can machine without even getting out of bed!

You get out of bed too run your machines?

(04-24-2014, 08:11 PM)Shawn Wrote: [ -> ]You get out of bed too run your machines?

I have to - they are in a different post code to me!

Like many folks here I have to walk farther to get to my truck than to my lathe : ) I'm even tossing around the idea of converting a basement room into a cnc room so I have the extra space to build an enclosure for my mill.

About halfway done with the bracket that will hold a small air, pencil die grinder for engraving. I'm not sure if the HDPE plastic is going to grip the grinder tight enough to prevent it slipping on the Z axis but I'll find out. The HDPE was the only stock I had large enough!











Shawn

Couldn't sit and watch tv when all I had to do was drill a few holes and cut a slot.



Shawn

So...

How does it perform?

I had a quick go just using one of the wizards that come with Mach3 but it seems to do an ok job. The larger engraving seems to have got shallower as it progressed but I don't know if it was the spindle slipping or the material surface being uneven? I need to do more testing to find out.

The smaller text is .125" tall and cut at a depth of .005" the larger text is .250" tall and cut at .004" Both were cut at 8 ipm.







Shawn

That's pretty cool Shawn.