Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
05-21-2015, 06:07 PM
(This post was last modified: 05-21-2015, 06:08 PM by stevec.)
My fav. is 1/8-7014.
I use 5/32-7014 for thicker stuff but sometimes 2 passes of the 5/32 for thicker stuff works better. Maybe it's a "sweet spot" thing for my old buzz box.
I'm curious to see others recommendations / experiences.
Sometimes it's hard to shell out for a whole box of rods just to see if it'll work better for ya.
Steve
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 2,608
Threads: 99
Joined: Dec 2014
Location: Michigan
What do the numbers mean (6011, 7014, 7018, ...)? I also see that some of them have 180 in front of them. Does that have any significance? I'm looking at Lincoln Electric rods for reference.
Posts: 8,829
Threads: 318
Joined: Feb 2012
Location: Arizona/Minnesota
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
3/32 seams pretty small for that heavy of material. If I had to stick weld it I'd be using 1/8 or 5/32 as Steve suggested, if you have the power Luke
The first two numbers are the tensile strength in thousands of pounds , the next number is position, a 1 is all position and the last is the type of coating.
Free advice is worth exactly what you payed for it.
Greg
Posts: 1,827
Threads: 51
Joined: Apr 2012
Location: Oklahoma
take for instance 7018, the 70 means 70,000 pounds tensile strength, the 1 means its an all position rod, and the 8 tells you what type of flux is on the rod.
with 6011, its 60,000 pounds, all position, with a cellulose based flux and because its for AC it has an arc stabilizer in the flux.
6010 same thing except no arc stablizer
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
Posts: 2,608
Threads: 99
Joined: Dec 2014
Location: Michigan
I see from one of Ed's links that an E in front of the number means it's for MMA, is there a problem with using it for a real stick welder?
Posts: 1,827
Threads: 51
Joined: Apr 2012
Location: Oklahoma
the E from Ed's post say's its an Electrode which will burn in any welder far as I know.
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
Posts: 2,608
Threads: 99
Joined: Dec 2014
Location: Michigan
I was referring to this: E just means the electrode is for MMA welding and has a flux coating.
Posts: 1,827
Threads: 51
Joined: Apr 2012
Location: Oklahoma
(05-21-2015, 09:10 PM)Vinny Wrote: I was referring to this: E just means the electrode is for MMA welding and has a flux coating.
yep that's what it means
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
Posts: 2,608
Threads: 99
Joined: Dec 2014
Location: Michigan
|