Table for my mill
#31
My fav. is 1/8-7014.
I use 5/32-7014 for thicker stuff but sometimes 2 passes of the 5/32 for thicker stuff works better. Maybe it's a "sweet spot" thing for my old buzz box.
I'm curious to see others recommendations / experiences.
Sometimes it's hard to shell out for a whole box of rods just to see if it'll work better for ya.

Steve

Smiley-eatdrink004
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#32
What do the numbers mean (6011, 7014, 7018, ...)? I also see that some of them have 180 in front of them. Does that have any significance? I'm looking at Lincoln Electric rods for reference.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#33
These should help:

http://www.mig-welding.co.uk/wiki/Electr...ence_Chart

http://www.mig-welding.co.uk/electrode-c...cation.htm

Ed
Reply
Thanks given by:
#34
3/32 seams pretty small for that heavy of material. If I had to stick weld it I'd be using 1/8 or 5/32 as Steve suggested, if you have the power Luke
The first two numbers are the tensile strength in thousands of pounds , the next number is position, a 1 is all position and the last is the type of coating.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#35
take for instance 7018, the 70 means 70,000 pounds tensile strength, the 1 means its an all position rod, and the 8 tells you what type of flux is on the rod.

with 6011, its 60,000 pounds, all position, with a cellulose based flux and because its for AC it has an arc stabilizer in the flux.

6010 same thing except no arc stablizer
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#36
I see from one of Ed's links that an E in front of the number means it's for MMA, is there a problem with using it for a real stick welder?
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#37
the E from Ed's post say's its an Electrode which will burn in any welder far as I know.
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#38
I was referring to this: E just means the electrode is for MMA welding and has a flux coating.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#39
(05-21-2015, 09:10 PM)Vinny Wrote: I was referring to this:  E just means the electrode is for MMA welding and has a flux coating.

yep that's what it means

DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#40
Oh. Ok. Thanks!!
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)