Todays Project - What did you do today?
(06-22-2015, 10:59 AM)zmotorsports Wrote: Shop time with your son is the best. I seem to be cherishing those times more and more as time goes on.

Mike.



yea thanks kid is smart mom enables em and the school remediates ... hes got allot more upstairs than folks realize
Reply
Thanks given by:
Had some time top make chips this evening so I whittled away at my AR-15 forgings a bit. The task at hand was to bore and thread the 1 3/16-16 hole for the buffer tube, the anti rotation hole and the hole for the take down pin detent. The thread was fun because it required a fixture to hold the receiver in the lathe so I could single point the thread (I'm too cheap to buy a tap). I'm going to try to finish them before heading North over the fourth. One can never make too much noise on the fourth of July. Big Grin

Tom

[Image: IMAG1253.jpg]
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
Looking good there Tom. I'm just getting started to work on my 80% lowers(don't have a big enough lathe to do what you're doing). Also just got my new mill up on the bench and was that fun.
Reply
Thanks given by:
(06-24-2015, 09:22 PM)TomG Wrote: Had some time top make chips this evening so I whittled away at my AR-15 forgings a bit. The task at hand was to bore and thread the 1 3/16-16 hole for the buffer tube, the anti rotation hole and the hole for the take down pin detent. The thread was fun because it required a fixture to hold the receiver in the lathe so I could single point the thread (I'm too cheap to buy a tap). I'm going to try to finish them before heading North over the fourth. One can never make too much noise on the fourth of July. Big Grin

Tom

[Image: IMAG1253.jpg]

Looks great Tom. Are we to expect seeing a new video on this soon? Big Grin I love watching your videos.

Mike.

Reply
Thanks given by:
Tom where did you get your 80% lower? I assembled a Rock River Lower and am in the process of assembling a DPMS upper.
I wanted a 24" fluted barrel and the only one available that I could find was for a DPMS. Keep us informed on your progress.

By the way I also find your YouTube videos very educational keep up the good work.
Reply
Thanks given by:
new project I started the other day

   
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
No videos on this one because there are many already out there. These are actually 0% lowers, or a bare forging. I picked them up from various places online and at gun shows with prices typically around $20. I've heard that Brass Aluminum Forging, LLC, one of the manufacturers will sell them to individuals, but I haven't tried it yet. They are just down the street from me in Ferndale so it would be convenient.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
Tom,

What sort of metal is that made of?

Ed
Reply
Thanks given by:
Hey Ed,

It's 7075-T6 aluminum. It's wonderful stuff to machine, as long as you have sharp tooling.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by: EdK
Lazy mans work stop .. I needed a quick  ( temp) work stop for the mill . But I have like 4 other projects unfinished at home so I  dug through my draws and found a bunch of miss fit parts from old indicator bases . Made a column to mach diam w/ T nut thread. . At lunch  threaded it 3/8 16 , turned a cross slider and parted  a  brass washer  on  my breaks. Added  T- nut   and brought home a functional part for the time being .I  do plan on making a work stop for my mill vice in near future but this will hafta  do until have time to make one  to  attach to back of vice . The next one will be  more rigid yet  stream line out of the way, with only one  pivot moving adjustment for x y and Z.


Attached Files Thumbnail(s)
       
Reply
Thanks given by:




Users browsing this thread: 66 Guest(s)