Tool Grinder (maybe)
#21
Greg, thanks for the pic, boy! they ARE worth a thousand words.
I knew it couldn't be a simple cotter pin so I Googled split cotter and that's where I got the pic of the cotter pin and, actually, they are split.
I went back to Google this morning and found a website just a bit down from the one I got the cotter pin pic from and low and behold Slaphead, there it was.
It's something I would have described as "a clamp like the spindle lock on some drill presses or tailstock rams" which is rather clumsy compared to "split cotter" Rotfl

Now I can take it easy for the rest of the day, having learned something already.Smiley-eatdrink004
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#22
Great, cleared that up for everyone, but no ones told me how I managed to turn a crooked thread on a lathe.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#23
You had one eye closed. Thumbsup

"Billy G" Big Grin
Reply
Thanks given by:
#24
(11-15-2012, 07:51 PM)f350ca Wrote: Interesting screw up today.

I appreciate the phrase in connection with this problem.
(11-15-2012, 07:51 PM)f350ca Wrote: then single pointed a 7/8 14 tpi thread on the end. Cleaned it up with a solid die, then parted it off. The thread is crooked to the pin.
I've had that problem occur before and, I'm not sure whether the dietilts as ithe first point engages or what.
I hate power threading with a die unless it's securely held in a tailstock holder. I've now taken to continue the single point cutting til a sample female thread (i.e. nut) will thread on nicely.
Maybe it's because of broken or dull teeth on one (or more) of the 3 (or 4 or whatever) sets of teeth on the die.
I'm sure your counterbore solution will shoulder up with no problens
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#25
I wasn't using the die under power, must have tilted as you say, worked fine for the mandrel in the very first picture.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#26
A little more progress.
Have all the swivels finished except for the locking handles, using allen bolts and a knurled knob I found, may make more of them, has plenty of purchase to lock the movement.

[Image: IMG_0341.jpg]

[Image: IMG_0342.jpg]
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#27
As the young kids say:


"SWEEET!
sasquatch, proud to be a member of MetalworkingFun since Jul 2012.
Reply
Thanks given by:
#28
It is making much more sense now that it is coming together Greg. I'm enjoying your work.
Hunting American dentists since 2015.
Reply
Thanks given by:
#29
oooh, more progress. at this rate, you'll be done in no time!
however it works, it looks bloody good to me!
Reply
Thanks given by:
#30
Greg,
Looks good to me as well Smiley-signs107
Smiley-eatdrink004
DaveH
Reply
Thanks given by:




Users browsing this thread: 3 Guest(s)